 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Hydraulic filter elements often are woven wire mesh separator filtration media. Marvel has designs hundreds of hydraulic filter
element strainers and mesh separator applications in a wide variety of materials for our OEM customers. These high quality, low
cost strainers and filter elements can be used for hydraulic fluids, coolants and lubricants. Tank mounted strainers installed
through reservoir side wall, tank top or into a standpipe. Either way, access is easy. Male, female and barbed connections
available with a micrometre rating range of 1 to 546.
Replacement filter elements will be listed in the specific category of its use.
Please see Suction Filters, Return Line, Pressure filter, Spin on, Tank Mount.
element strainers and mesh separator applications in a wide variety of materials for our OEM customers. These high quality, low
cost strainers and filter elements can be used for hydraulic fluids, coolants and lubricants. Tank mounted strainers installed
through reservoir side wall, tank top or into a standpipe. Either way, access is easy. Male, female and barbed connections
available with a micrometre rating range of 1 to 546.
Replacement filter elements will be listed in the specific category of its use.
Please see Suction Filters, Return Line, Pressure filter, Spin on, Tank Mount.
Cleanable reusable filter elements are woven wire mesh filtration media.
Hundreds of strainers and filtration applications for our OEM customers
designs are available. Take apart units are high quality, low cost strainers
are used for hydraulic fluids, coolants and lubricants. Tank mounted
strainers, reservoir side wall, tank top or into a standpipe uses. Either way,
access is easy. Male, female and barbed connections available with a
micrometre rating range of 1 to 546.
Hundreds of strainers and filtration applications for our OEM customers
designs are available. Take apart units are high quality, low cost strainers
are used for hydraulic fluids, coolants and lubricants. Tank mounted
strainers, reservoir side wall, tank top or into a standpipe uses. Either way,
access is easy. Male, female and barbed connections available with a
micrometre rating range of 1 to 546.
Bonded sump filter elements are for regular petroleum base hydraulic
oils, coolants, lubricants and all types of fire resistant hydraulic fluids and
water. Capacities: 10 -20 -30 -50 -75 and 100 gpm. Pipe sizes: 1", 1-1/4" ,
1-1/2", 2", 2-1/2" and 3" npt male and female as well as "O" ring seal.
Operating temperatures: Up to 300F.
oils, coolants, lubricants and all types of fire resistant hydraulic fluids and
water. Capacities: 10 -20 -30 -50 -75 and 100 gpm. Pipe sizes: 1", 1-1/4" ,
1-1/2", 2", 2-1/2" and 3" npt male and female as well as "O" ring seal.
Operating temperatures: Up to 300F.
.Capacities: 10 20 30 50 and 75 gpm. Pipe sizes: 1", 1-1/4" , 1-1/2", 2" and
2-1/2" npt male and female as well as "O" ring seal. Operating
temperatures: Up to 300F. No by pass. Unique Marvelmag magnetic
shield protects entire hydraulic system from those ever present ferric
contaminants.
2-1/2" npt male and female as well as "O" ring seal. Operating
temperatures: Up to 300F. No by pass. Unique Marvelmag magnetic
shield protects entire hydraulic system from those ever present ferric
contaminants.
Hydraulic Filter Elements